> Previous contributions to the AboutSpice.com mailing-list
Submitted by: steeletraps on 2005-05-21 00:12:53. Topic: Re: calculation of energy Body: My Micro-Cap simulator lets you use the ED operator to plot the energy dissipated in a device. However, I don't know if PSpice (I assume this is what OrCad is using for the simulation) has that. You would probably need to use an integral operator with a V*I argument. For example, you should be able to use:
where SDT integrates with respect to time. I'm pretty sure this operator is available in PSpice. Reply to this contribution | Write to the contributor Submitted by: ruchwi16 on 2004-01-09 10:52:29. Topic: calculation of energy Body: I need to calculate the switching energy loss of the a IGBT. I used Orcad capture, and obtained current and voltage waveforma. How can I calculate energy loss? Reply to this contribution | Write to the contributor Post a new contribution | Back to the list of topics
Copyright © 2001-2019
CIW. All rights reserved. For any comment, update or feedback, please use the contact us form. All registered and unregistered trademarks referenced herein are the property of their respective owners and no trademark rights to the same is claimed. Read our privacy statement.
The material on this web site is provided "as-is" without warranty of any kind, expressed or implied, including without limitation any warranty concerning the accuracy, adequacy, or completeness of the material or the results obtained using same. CIW will not be responsible for any claims attributed to errors, omissions, or other inaccuracies in the material presented on this web site. In no event shall CIW be liable for direct, indirect, special, incidental, or consequential damages of any nature in connection with, or arising out of, any use or application of the materials herein.